anchor_top gallery
New Products now available in the hire department...

Antari DNG-100 Low Fog Machine

It converts normal fog into a floor-hugging cloud!

The DNG-100 Low Fog Machine converts normal fog from any fog machine into a floor-hugging cloud of dense, white fog that’s almost virtually similar to the dry ice effect. This is achieved by cooling the temperature of the fog to the point where it falls to the ground.
The DNG-100 Low Fog Machine is easy to operate as there are no external controls on the machine. Simply plug the unit IN and place the fog conducting hose from the output of any fog machine to the input of the DNG-100. The unit is fully operational upon being plugged IN. Note that the volume of fog produced is controlled by the fog machine that the DNG-100 is attached to

Product Features:
  • Power : AC 220-240V / 50-60Hz
  • Power Consumption (Compressor) : 600W
  • Weight : 72 Kg
  • Dimensions (mm) : L 750 W 607 H 347
  • Liquid Used : Antari FLR-5 Liquid

Contact our Hire department for further information.

Astera AX3 Lightdrop™

Clearlight are the first in Australia to stock them!

The Lightdrop™ is an IP65 waterproof, RGBW wireless
spotlight. It has a magnetic underside so it can be hung from ceilings, walls or under tables, it can also be used as an angled spotlight with its adjustable stand or hung on a
traditional bar with a hook clamp

Product Features:
  • RGBW Cree LED Chip
  • TruColor™ Calibration
  • Dynamic Power-boost
  • CRMX Wireless DMX + W-DMX compatible
  • IP65 Waterproof
  • Long-life SAMSUNG Battery
  • Extremely high luminous power
  • Charging/Carry Case available (holds 8)

Contact our Hire department for further information.

Philips Selecon Rama LED Fresnel
Homogenised fully mixed white light with no multiple shadows or fringing. Adjustable yoke balance point.
'Swing down' door for easy access and automatic mains power disconnection

Product Features:
  • 7° - 50° beam angle range.
  • Homogenised fully mixed white light with  no multiple shadows or fringing.
  • Tilt and focus scales are in real degrees allowing for accurate WYSIWYG implementation
  • Quiet active cooling system.
  • Adjustable yoke balance point.
  • Smooth ‘posi-slide’ focus system, no metal to metal contact.
  • DMX512 (RDM) Input/Output with 8 or 16-bit resolution.
  • Onboard LCD Menu for ease of addressing/setup/manual operation.
  • Constructed from aluminium extrusion and moulded engineering plastics

Contact our Hire department for further information.

Philips Selecon PLPROFILE1 LED

A New Level of Creativity

The PLPROFILE1 uses the same proven LED engine as the Philips Selecon PL3, PL1, PLCYC1, PLFRESNEL1 and the Philips Vari-Lite VLX ranges meaning colour matching is simplified across the stage. The user interface is the same ensuring ease of use.
A key benefit of the PLPROFILE1 is that it is no longer necessary to change lamps or colour filter. Combining the superior control and light quality of a Philips Selecon Profile with seamless fading between colours allows designers a new level of creativity.
Less power consumption and no dimmer circuits makes the PLPROFILE1 the obvious choice for pattern projection and stage washes

Contact our Hire department for further information.

Philips SL PAR 155 ZOOM

The Highest Output

The SL PAR 155 ZOOM is a die-cast aluminum LED Par can that utilizes nine homogenized RGBW LEDs to produce over 3200 lumens of output. The manual zoom provides a beam angle range from 8° to 40° and the split yoke bracket allows for easy hanging or floor mounting.
The rugged construction, internal power supply, and ease of use make the SL PAR 155 ZOOM a natural replacement for conventional PAR fixtures. Whether illuminating stages, buildings, clubs, landscapes or other entertainment and architectural elements, the SL PAR 155 ZOOM provides designers with the highest output and best colour uniformity.
Simple daisy chaining of power and data, along with a split yoke bracket permit quick setup in any orientation.  Configuration is also made easy through use of the standard Showline LCD menu system

Contact our Hire department for further information.

LED Star Curtain
Very popular TriColour Led Star Curtain coming complete in own roadcase, perfect for backdrops and special theme applications

Product Features:
  • 6x4m black curtain
  • High quality fire retardant material
  • Auto, DMX and music control
  • 8 sections/32 channel mode
  • Easy installation

Contact our Hire department for further information.


LDR CANTO 1200 msd/msr MK2
This 1200W followspot is designed for use with either a MSR or MSD source. It incorporates a double condenser zoom optical system, a large side handle to control pan and tilt movement, and a double microswitch for safe lamp replacement. The minimum beam angle of 8° produces nearly 2500 lux at 30m with a 3m beam diameter. An external ballast, iris diaphgram, mechanical dimmer, spigot, colour frame and 2m mains cable are all included as standard. Ideal for use in medium/large scale venues.
A five-colour colour charger unit is available as an optional extra.

Product Features:
  • Optical System double condenser + zoom
  • Reflector 68mm dia glass.
  • Microswitch double-pole         
  • Colour Gel Dimension 185x185mm       
  • Throw 10-40m       
  • Beam angle 8°-22°

Contact our Hire department for further information.

Martin MAC Viper Profile™
The MAC Viper Profile is a new breed of high-output profile luminaire with an exceptional feature set and highly efficient optical system that outperforms market-leading profiles in the 1200-watt range. Its 1000-watt HID source is convincingly brighter than 1200-watt fixtures and the MAC Viper Profile also outperforms them in terms of speed and compactness. Power consumption is lower and output is approximately 55% more efficient.

Product Features:
  • 26000 lumens for excellent light quality with a very flat and uniform field
  • 1:5 fast zoom with auto-linked focus
  • Fat beam front lens. The 140 mm front lens exceeds the size of any other fixture in this segment for just the right fat beam look
  • 5 + 5 rotating glass gobos with optimal focal separation for superior morphing effects
  • Patent-pending FX wheel provides an additional 4 fixed gobos and 135° animation effect
  • 8-slot color wheel with fixed colors for added color choice. Vibrant color mixing with a superior palette of colors including true reds, rich ambers, primary green and deep blues
  • Linear CTO. Daylight to tungsten CCT control and expansion of the CMY palette
  • Combined dimmer/shutter system with intensity effects, instant blackout/open and smooth fades
  • Fast and tight iris with adjustable dynamic effects
  • Diverse strobe effects using mechanical or electronic control or in combination
  • A soft light frost leaves gobo artwork visible with a beautiful soft edge. Includes a linear focus blurring option
  • 4-facet prism, real beam separation with rotation and index control for dynamic effects and accurate tiling

  • Contact our Hire department for further information.

    • ROBE Robin 800 LEDWash

      The enhanced ROBIN® 800 LEDWash brings Robe’s patented system for seamless, even and smooth zoom and output of RGBW multichip LED technology a step further. Brighter LED chips and a removable beam shaper module with motorized rotation creates the perfect combination for theatre, TV and other professional applications. The fixture has an incredibly wide zoom range starting at 8 degrees and going up to 63 degrees.Many enhanced features include quiet zoom operation, Beam/Wash zoom mode, virtual colour wheel with calibrated whites, RGBW/CMY colour mixing and more. The touch screen navigation display supports many controlling protocols, status data logging, software updates and other features which are standard in the Robe ROBIN series.

      Product Features:
      • Colour rainbow effects in both directions with variable speed
      • RGBW, 8 or 16 bit colour mixing
      • Zone colour effects in both directions with variable speed
      • Virtual colour wheel with pre-programmed 237 colours including whites (2,700 K, 3,200 K, 4,200 K, 5,600 K and 8,000K)
      • Range Tungsten lamp effect at whites 2700K and 3200K
      • Control Channels 38, 22, 16, 11, 38
      • 5 DMX protocol Modes
      • Max. power consumption: 420W
      • Power Supply 100–240 V AC, 50–60 Hz
      • LED Life Expectancy minimum 60.000 hours
      • Pan/Tilt Pan/Tilt movement: 450°/300°
      • Data in/out: Locking 3-pin & 5-pin XLR
      • Ethernet port: Art-Net protocol, ready for ACN
      • 3 editable programs, each up to 100 steps
      • Built-in analyzer for easy fault finding
      • Removable Beam shaper with motorized rotation +/- 90°
      • Dimmer high resolution dimmer 0–100%
      • Beam and Wash zoom mode and CTO filter
      • 3 LED rings - Individual colour control of each LED ring
      • Pre-programmed random strobe & pulse effects and individual zone strobe effects with variable speed
      • Strobe effect with variable speed (max. 20 flashes per second)
      • Zoom range, linear motorized zoom 8° – 63°
      • Dimensions 444mm H x 300mm W x 203mm D
      • Weight 11.5kg

    • Contact our Hire department for further information.

      • ETC Source Four Junior Zoom Profile Spot
        575W compact high-efficiency profile with 25º-50º beam angle range.The power of Source Four in a compact and economical size. The smaller-scale Source Four Jr Zoom uses the same technology that made the standard Source Four famous, unsurpassed imaging and beam quality.
        The Source 4 Jr Zoom is suited towards; smaller theatre venues, churches, schools and any other applications where space savings and great performance are the criteria. The Jr Zoom is the perfect choice if your projection distance, size, or lighting conditions vary.

        Product Features:
        • 25º-50º Zoom
        • Rated up to 575W
        • Super-efficient HPL lamp
        • Faceted dichroic reflector removes 90% of IR heat from beam
        • Two-plane stainless-steel shutter blade assembly
        • Tool-free lamp adjustment
        • M size Gobo Holder

        The Source 4 Jr Zoom Profile compliments Clearlight Shows current range of 19º, 26º and 36º Source 4 Profiles for hire.

        Contact our Hire department for further information.

        Martin MAC TW1 1200w 80v Tungsten Wash  
        The MAC TW1 is a 1200w wash fixture that combines a motorized zoom, CMY colour mixing and both internal and external electronic dimming with the warmth of tungsten halogen. Despite being the brightest 1200w fixture in its class the MAC TW1 is also exceptionally quiet.
        The TW1 uses a large glass cold-mirror ellipsoidal reflector, followed by a hot mirror to keep as much heat as possible in the rear of the unit. The standard lens gives a variable range of 19°–40° while a narrow lens is also available (14°-27°). The MAC TW1’s incandescent source is perfect for highlighting skin tones or textiles, making it the preferred source for television, theatre, film sets, fashion shows, and corporate events. 

        Contact our Hire department for further information.

        led range
        smoke machines

        Updated 12 August 2016

        Back to top

        Copyright © 2009 Clearlight Shows Pty Ltd. All rights reserved - designed by 3Pstudios of aussicom international pty ltd melbourne
        Call us now +61 3 9553 1688

        home | about us | services | sales | hire | production | specials | news | faq's | contact | clearlight blog